This is the Slide Tube Rounder. It was made on the lathe out of a piece of brass. It's measured down to exactly 0.458'' then it was drilled and threaded.
This is the bearing seater. We will use this tool later on the french horn. It was made on the lathe.
This little piece of brass tubing was warmed and then bent to make a water key spring installer
 |
These are the large and small pokers. We made these on the second day of classes.
We made the porting tool the fisrt day of brass class. It has a silver soldered nub on the end that has to be measured exactly, then buffed to erase the solder marks...
